Válvula de retenção de fecho lento 300X-16Q

Válvula de retenção de fecho lento 300X-16Q

ESPECIFICAÇÕES

1.Slow Closing Check Valve is a special check valve that reduces water hammer impact and noise through delayed closing mechanism.
2.Its core function is to prevent medium back flow, and at the same time, the slow closing design can alleviate the pressure fluctuation when the valve is closed
3.Protecting the pipeline system from water hammer damage

Princípio de funcionamento

1.Opening process: When the medium flows forward, the pressure pushes the valve disc to open, and the fluid passes smoothly.
2.Slow closing process: When the medium flow rate decreases or stops, the valve disc slowly closes under the action of the slow closing mechanism (such as damper, spring) to avoid the high-pressure shock wave (water hammer) caused by instantaneous closing.
3.Complete sealing: The valve disc is finally completely closed to block the back flow of the medium.

DESTAQUES :

1.Water hammer protection:The slow closing design significantly reduces the pressure surge in the pipeline system caused by the rapid closing of the valve, protecting the pump, pipeline and connected equipment.
2.Low noise operation:Slow closing reduces the impact sound of the valve disc and the valve seat, suitable for noise-sensitive environments such as hospitals and residential areas.
3.Extend equipment life:Reducing water hammer impact can avoid pipeline vibration and joint leakage, and extend the service life of water pumps, valves and pipelines.
4.Adapt to complex working conditions:The slow closing time can be adjusted (through dampers or spring preload), suitable for systems with different flow and pressure.

Cenários de aplicação típicos

1.Water supply and drainage system: prevent water back flow at the pump outlet when the pump is stopped, and avoid reverse damage to the pump body.
2.Firefighting network: maintain one-way water supply to the fire water tank or pipeline to prevent water hammer caused by sudden pressure drop.
3.Heating, ventilation and air conditioning (HVAC): protect heat exchangers and water pumps in the circulating water system.
4.Industrial pipeline: pipelines for transporting easily vaporized liquids or gas-containing media in industries such as chemical and electric power.
5.Long-distance water pipeline: reduce the impact of pressure fluctuations caused by valve closure on the pipeline.

PRESSÃO DE TRABALHO

Pressão máxima de trabalho 16 bar (230psi).

PADRÃO

O teste do produto é efectuado em conformidade com o teste de pressão da válvula industrial GB/T13927.

GAMA DE TEMPERATURAS

0 °C a 80°C.

REVESTIMENTO

Revestimento epóxi ligado por fusão.