Поглотитель водяного молота типа 9000

9000 Type Water hammer absorber

ОПИСАНИЕ ПРОДУКТА

1.Water hammer eliminators can effectively eliminate irregular water hammer and surge oscillations that may be generated by various types of fluids in the transmission system without blocking the flow of fluids, thereby eliminating destructive shock waves and achieving the purpose of protection.
2.The 9000 absorber has a sealed container cavity inside and a piston at the lower end. When the shock wave enters the water hammer absorber, the water hammer wave acts on the piston, and the piston moves toward the container cavity.
3.The piston moves up and down under the dual action of the gas at a certain pressure and the irregular water hammer wave, forming a dynamic balance, thus eliminating the irregular water hammer wave oscillation on the spot.
4.It is suitable for various water supply and drainage systems such as factories, mines, enterprises, high-rise buildings, power stations, etc.
5.It has excellent water hammer attraction without blocking the water flow, effectively eliminating water hammer. Protect pipelines and equipment from damage.

ПРИЛОЖЕНИЕ

1.It is used as a cut-off device on the fluid pipe line in the construction.
2.защита городской среды.
3.Нефтехимия.

РАБОЧЕЕ ДАВЛЕНИЕ

Максимальное рабочее давление 16 бар (230psi).

СТАНДАРТ

Испытания продукции проводятся в соответствии с GB/T13927 Испытание промышленного клапана давлением.

ДИАПАЗОН ТЕМПЕРАТУР

От 0 °C до 80 °C.

ПОКРЫТИЕ

Эпоксидное покрытие с плавкой связью.