Selecionar página

Válvula borboleta de turbina tipo wafer D371X-16Q

The D371X-16Q Wafer Type Turbine Butterfly Valve uses a turbine drive for high-torque operation, rotating the disc 90° for on/off or flow control. Suitable for large-diameter, medium-high pressure pipelines (PN16-PN25), it offers low flow resistance, 0°C-80°C range, and epoxy coating for durability.

Ver o Válvula de borboleta for more information

Válvula borboleta de turbina tipo wafer D371X-16Q

ESPECIFICAÇÃO DO MATERIAL
Não. Nome Quantidade Material Não. Nome Quantidade Material
1 Corpo da válvula 1 QT450-10 7 Chave 1 45#
2 Bucha (curta) 2 F4 8 Chainring 1 Q235
3 Anel de vedação 1 NBR 9 Cabeça manual 1 HT250
4 Casquilho (longo) 2 F4 10 Pega 1 Alumínio
5 Sede da válvula 1 NBR 11 Botão de mola do punho 1 Alumínio
6 Placa da válvula 1 QT450-10 12 Mola do punho 1 65M
DIMENSÕES
DN A B C D L h Ø Ø1 Ø2 N-Ø3 ØK
50 128 73 42 201 190 32 150 125 120 4-19 57.15
65 137 82 44.7 212 190 32 150 145 140 4-19 57.15
80 142 91 45.2 217 190 32 150 160 150 8-19 57.15
100 164 107 52.1 239 250 32 150 180 175 8-19 69.85
125 176 127 54.4 251 270 32 150 210 210 8-19 69.85
150 198 143 55.8 273 270 32 150 240 240 8-23 69.85
200 230 170 60.6 313 359 45 300 295 290 8-23/12-23 88.9
250 292 203 65.6 375 359 45 300 350/355 355 12-23/12-28 88.9
300 337 242 74 420 359 45 300 400/410 400 12-23/12-28 107.95
350 368 267 76.17 451 45 300 460/470 445 16-23/16-28 107.95
400 400 309 86.5 591 51.2/72 300 515/525 510 16-28/16-31 158.75
450 422 328 105.6 633 51.2/72 300 565/585 565 20-28/20-31 158.75
500 480 361 131.8 690 64.2/82 300 620/650 620 20-28/20-34 158.75
600 562 459 152 770 70.2/82 300 725/770 730 30-31/20-37 215.9

DESCRIÇÃO DO PRODUTO

1.The wafer turbine butterfly valve is a butterfly valve that uses a wafer connection and a turbine transmission device.
2.The turbine reduction mechanism drives the valve plate to rotate, achieving high torque and labor-saving operation.
3. It is suitable for opening and closing and flow regulation of medium- and high-pressure, large-diameter pipelines.
4.Open: Rotate the turbine handwheel clockwise, and the worm drives the valve stem to rotate 90°, the valve plate is parallel to the pipeline, and the fluid channel is fully open.
5.Close: Rotate the handwheel counterclockwise, the valve plate cuts off the fluid vertically, and the sealing ring is pressed to achieve tight closure.
6.Flow regulation: The valve plate opening (0°~90°) is accurately controlled by the handwheel rotation angle to achieve linear flow regulation.

CARACTERÍSTICAS

1.Low flow resistance and high efficiency: the flow channel is straight when fully open, and the pressure loss is small (only 10%~20% of the pipeline resistance).
2.Strong durability: the turbine box has a high protection level and is suitable for outdoor or harsh environments.
3.Limitations:The volume and weight are large, and the installation requires reserved operating space.
4.The cost is higher than the handle butterfly valve, and the maintenance complexity is slightly higher.

CANDIDATURA

1. engenharia municipal: grande rede de abastecimento de água, abertura e fecho da estação de bombagem da estação de tratamento de águas residuais e controlo do fluxo.
2. petroquímica: condutas de média e alta pressão para petróleo bruto e meios químicos (como PN16~PN25).
3. indústria de energia: sistema de circulação de água, regulação da tubagem de água de arrefecimento.
4. sistema industrial: condutas de ar de grande diâmetro para ventilação, despoeiramento e tratamento de gases de combustão (como DN1000 e superior)

PRESSÃO DE TRABALHO

Pressão máxima de trabalho 16 bar (230psi).

PADRÃO

O teste do produto é efectuado em conformidade com o teste de pressão da válvula industrial GB/T13927.

GAMA DE TEMPERATURAS

0 °C a 80°C.

REVESTIMENTO

Revestimento epóxi ligado por fusão.

Válvula borboleta de turbina tipo wafer D371X-16Q Válvula borboleta de turbina tipo wafer D371X-16Q

Deixe a sua mensagem