Vanne papillon à turbine de type Wafer D371X-16Q
The D371X-16Q Wafer Type Turbine Butterfly Valve uses a turbine drive for high-torque operation, rotating the disc 90° for on/off or flow control. Suitable for large-diameter, medium-high pressure pipelines (PN16-PN25), it offers low flow resistance, 0°C-80°C range, and epoxy coating for durability.
Voir le Vanne papillon for more information
Vanne papillon à turbine de type Wafer D371X-16Q
DESCRIPTION DU PRODUIT
1.The wafer turbine butterfly valve is a butterfly valve that uses a wafer connection and a turbine transmission device.
2.The turbine reduction mechanism drives the valve plate to rotate, achieving high torque and labor-saving operation.
3. It is suitable for opening and closing and flow regulation of medium- and high-pressure, large-diameter pipelines.
4.Open: Rotate the turbine handwheel clockwise, and the worm drives the valve stem to rotate 90°, the valve plate is parallel to the pipeline, and the fluid channel is fully open.
5.Close: Rotate the handwheel counterclockwise, the valve plate cuts off the fluid vertically, and the sealing ring is pressed to achieve tight closure.
6.Flow regulation: The valve plate opening (0°~90°) is accurately controlled by the handwheel rotation angle to achieve linear flow regulation.
CARACTÉRISTIQUES
1.Low flow resistance and high efficiency: the flow channel is straight when fully open, and the pressure loss is small (only 10%~20% of the pipeline resistance).
2.Strong durability: the turbine box has a high protection level and is suitable for outdoor or harsh environments.
3.Limitations:The volume and weight are large, and the installation requires reserved operating space.
4.The cost is higher than the handle butterfly valve, and the maintenance complexity is slightly higher.
CANDIDATURE
1. ingénierie municipale : grand réseau d'approvisionnement en eau, station de traitement des eaux usées, ouverture et fermeture de la station de pompage et contrôle du débit.
2. pétrochimie : pipelines à moyenne et haute pression pour le pétrole brut et les produits chimiques (tels que PN16~PN25).
3. industrie électrique : système de circulation d'eau, régulation des conduites d'eau de refroidissement.
4. système industriel : conduits d'air de grand diamètre pour la ventilation, le dépoussiérage et le traitement des gaz de combustion (DN1000 et plus)
PRESSION DE SERVICE
Pression de service maximale de 16 bars (230psi).
STANDARD
Les tests de produits sont effectués conformément à la norme GB/T13927 sur les tests de pression des vannes industrielles.
PLAGE DE TEMPÉRATURE
0 °C à 80 °C.
REVÊTEMENT
Revêtement époxydique fusionné.
Laissez votre message