DESCRI\u00c7\u00c3O DO PRODUTO<\/h2>\n
1.The ultrasonic flow meter is a brand-new product, mainly used in liquid media such as fire protection pipes that need to measure flow.
\n2.The principle of the ultrasonic flow meter is to use the difference in propagation time of ultrasonic transducers sending and receiving ultrasonic waves in the downstream and upstream media to measure the flow velocity of the medium.
\n3.The ultrasonic velocity in the downstream direction will increase, and the ultrasonic velocity in the upstream direction will decrease.
\n4.The same propagation distance will have different propagation times.
\n5.According to this time, the flow velocity is obtained, and then the flow rate is calculated by the flow velocity.<\/p>\n
CARACTER\u00cdSTICAS<\/h2>\n
1.The body of the ultrasonic flow meter is a straight-through integrated structure made of precision casting technology.
\n2.The hollow structure allows for truly unobstructed water flow, which is particularly suitable for China’s heating water quality and working conditions, with less pressure loss.
\n3.The structure is simple, easy to install and maintain.
\n4.It is completely unaffected by impurities, chemicals and magnetic materials in the medium, and its operation is very stable and reliable.
\n5.The measuring structure has no moving parts, never wears out, and the measurement accuracy is not affected by the use cycle.
\n6.It uses a single-chip microcomputer imported from the United States and an advanced micro-power design. It can be powered by batteries only.
\n7.It uses a special ultrasonic detection chip imported from Germany, which has higher accuracy.
\n8.It can be installed horizontally or vertically, which is extremely convenient and practical.<\/p>\n
Aplica\u00e7\u00e3o<\/h2>\n
1. sistema de prote\u00e7\u00e3o contra inc\u00eandios: proteger os tubos de aspers\u00e3o, as bocas de inc\u00eandio, etc., contra golpes de ar\u00edete ou flutua\u00e7\u00f5es de press\u00e3o.
\n2. sistema de abastecimento de \u00e1gua e de drenagem: evitar a sobrepress\u00e3o causada pelo arranque e paragem da bomba ou pelo mau funcionamento da v\u00e1lvula.
\n3) Condutas industriais: prote\u00e7\u00e3o de recipientes sob press\u00e3o ou condutas nos dom\u00ednios da qu\u00edmica, AVAC, energia, etc.
\n4. edif\u00edcios altos: equilibrar a diferen\u00e7a de press\u00e3o da \u00e1gua entre os andares para evitar a rutura da tubagem.<\/p>\n
Installation precautions<\/h2>\n
1.Before installation, the pipeline system should be thoroughly cleaned to remove debris such as hemp, sand and stones in the branch pipe to avoid meter failure.
\n2.It can be installed horizontally or vertically. In order to facilitate the over-standard display window, the position can be adjusted according to the installation situation. The water flow direction should be consistent with the arrow mark on the meter.
\n3.The diameter of the front and rear pipes must match the diameter of the meter.
\n4.Dirt filters and shut-off valves should be placed at both ends to facilitate filtering of dirt and maintenance and replacement<\/p>\n
PRESS\u00c3O DE TRABALHO<\/h2>\n
Press\u00e3o m\u00e1xima de trabalho 16 bar (230psi).<\/p>\n
PADR\u00c3O<\/h2>\n
O teste do produto \u00e9 efectuado em conformidade com o teste de press\u00e3o da v\u00e1lvula industrial GB\/T13927.<\/p>\n
GAMA DE TEMPERATURAS<\/h2>\n
0 \u00b0C a 80\u00b0C.<\/p>\n
REVESTIMENTO<\/h2>\n
Revestimento ep\u00f3xi ligado por fus\u00e3o.<\/p>\n
![\"Medidor](\"https:\/\/www.cnbaianfire.com\/wp-content\/uploads\/2025\/06\/LWBT-16Q-Flange-Type-Flow-Meter.webp\")
<\/p>","protected":false},"excerpt":{"rendered":"